1.Designed for solar street light system
2.Two terminals for two loads
3.CE approvals
EPDC10-EC
SOLAR CONTROLLER FOR SOLAR STREET LIGHT SYSTEMS
EPDC10-EC is the first generation for solar street light system, which provides automatic lighting control function. It can be connected with two loads at the same time. Good for street and pathway lighting, parking area, bus station and signage and etc.
EPDC10-2L Two Load Solar Light Controller Features
Microcontroller digital accuracy
PWM Charge mode & SOC
Temperature compensation
Automatic detection of the voltage & full automatic operation
Internal temperature sensor
Electronic protection
Short circuit protection
Reverse polarity protection
Reverse current protection at night
Over charging or discharging protection
Over load protection
Display
4 LED indicators
PV: Green –charging
Battery: Green-Yellow-Red
Load: Red –output on
Red flashing& blinking shows mistakes
The forth LED shows timers
EPDC10-2L Two Load Solar Light Controller Technical specification
EPDC10-2L series: 12 VOLT or 12/24 VOLT auto work, 10 AMPS (for PV and load)
Equalization voltage: 14.8 V
Boost voltage: 14.4 V
Float voltage: 13.6 V
Low voltage disconnect (LVD) 11.1 V
Low voltages reconnect (LVR): 12.6V
Temperature compensation: -30mv/°C/12V
Self-consumption: 6mA maximum
Terminals: for wire sizes to 6mm2
Temperature: -35°C to +55°C
Notes: It is for 12V system. Please X2 for 24V system.
10A 12V | 24V DC EPDC10-2L Two Load Solar Light Controller
Posted by admin in News
10A 12V | 24V DC EPDC10-2L Two Load Solar Light Controller
1.Designed for solar street light system
2.Two terminals for two loads
3.CE approvals
EPDC10-EC
SOLAR CONTROLLER FOR SOLAR STREET LIGHT SYSTEMS
EPDC10-EC is the first generation for solar street light system, which provides automatic lighting control function. It can be connected with two loads at the same time. Good for street and pathway lighting, parking area, bus station and signage and etc.
EPDC10-2L Two Load Solar Light Controller Features
Microcontroller digital accuracy
PWM Charge mode & SOC
Temperature compensation
Automatic detection of the voltage & full automatic operation
Internal temperature sensor
Electronic protection
Short circuit protection
Reverse polarity protection
Reverse current protection at night
Over charging or discharging protection
Over load protection
Display
4 LED indicators
PV: Green –charging
Battery: Green-Yellow-Red
Load: Red –output on
Red flashing& blinking shows mistakes
The forth LED shows timers
EPDC10-2L Two Load Solar Light Controller Technical specification
EPDC10-2L series: 12 VOLT or 12/24 VOLT auto work, 10 AMPS (for PV and load)
Equalization voltage: 14.8 V
Boost voltage: 14.4 V
Float voltage: 13.6 V
Low voltage disconnect (LVD) 11.1 V
Low voltages reconnect (LVR): 12.6V
Temperature compensation: -30mv/°C/12V
Self-consumption: 6mA maximum
Terminals: for wire sizes to 6mm2
Temperature: -35°C to +55°C
Notes: It is for 12V system. Please X2 for 24V system.