EPRC10-ST Solar Light Controller is specially designed for street lighting system. It`s intelligent and easy to operate. Adopting PWM charging mode, and according to the voltage of battery, load current, environment temperature and the capacity of battery, the controller can dramatically extend the service life of battery.
EPRC10-ST Solar Light Controller Features:
1. Intelligently SOCcontrol by SCM and special software.
2. Equipped with exterior temperature sensor, which is more sensitive and accurate than interior ones.
3. Equipped with over-charging and over-discharging protection, over load protection and unique reverse connecting protection.
4. Series PWM charging can increase the system efficiency by 3-6%, therefore the actual working time and service life of system is extended.
5. LED indicator can show the capacity of battery.
6. The chips adopted in controlling system are all for industry applying. They can work normally in extreme cold. Hot and humid environment. Crystal Oscillator time control ensures the system working precisely.
7. With LED display, all controlling function can be done by only one button.
8. Advanced power technology increase the system`s unit efficiency tramatically.
9. The products are installed with big size(6mm2)and sparse interval(9.5mm)
Model No: EPRC10-ST Solar Light Controller
EPRC-ST5: 12 VOLT or 12/24 VOLT auto work, 5AMPS (for PV and load)
EPRC-ST10: 12 VOLT or 12/24 VOLT auto work, 10AMPS (for PV and load)
Equalisation voltage: 14.8 Volt
High voltage disconnect (HVD): 14.4
Float voltage: 13.6Volt
Low voltage disconnect (LVD): 11.1 Volt
Low voltage reconnect (LVR): 12.6 Volt
Self-consumption: 6mA maximum
Temperature Compensation: -30mV/ C/12V
Terminals: For wire sizes to 6mm2
Temperature: -35 C to +55 C
Dimension: 140×90.5mm
Compliance: CE.
5A 12V | 24V DC EPRC10-ST Solar Light Controller
Posted by admin in News
5A 12V | 24V DC EPRC10-ST Solar Light Controller
EPRC10-ST Solar Light Controller is specially designed for street lighting system. It`s intelligent and easy to operate. Adopting PWM charging mode, and according to the voltage of battery, load current, environment temperature and the capacity of battery, the controller can dramatically extend the service life of battery.
EPRC10-ST Solar Light Controller Features:
1. Intelligently SOCcontrol by SCM and special software.
2. Equipped with exterior temperature sensor, which is more sensitive and accurate than interior ones.
3. Equipped with over-charging and over-discharging protection, over load protection and unique reverse connecting protection.
4. Series PWM charging can increase the system efficiency by 3-6%, therefore the actual working time and service life of system is extended.
5. LED indicator can show the capacity of battery.
6. The chips adopted in controlling system are all for industry applying. They can work normally in extreme cold. Hot and humid environment. Crystal Oscillator time control ensures the system working precisely.
7. With LED display, all controlling function can be done by only one button.
8. Advanced power technology increase the system`s unit efficiency tramatically.
9. The products are installed with big size(6mm2)and sparse interval(9.5mm)
Model No: EPRC10-ST Solar Light Controller
EPRC-ST5: 12 VOLT or 12/24 VOLT auto work, 5AMPS (for PV and load)
EPRC-ST10: 12 VOLT or 12/24 VOLT auto work, 10AMPS (for PV and load)
Equalisation voltage: 14.8 Volt
High voltage disconnect (HVD): 14.4
Float voltage: 13.6Volt
Low voltage disconnect (LVD): 11.1 Volt
Low voltage reconnect (LVR): 12.6 Volt
Self-consumption: 6mA maximum
Temperature Compensation: -30mV/ C/12V
Terminals: For wire sizes to 6mm2
Temperature: -35 C to +55 C
Dimension: 140×90.5mm
Compliance: CE.