20A 12V | 24V DC EPIP30 Solar Charge Controller with LCD Display
Adds new features and protections using highly advance technology
Provides longer battery life and improved system performance
Sets new standards for reliability and self-diagostics
Model No: EPIP30
EPIP30-20: 12/24 VOLT auto work, 20 AMPS
EPIP30-30: 12/24 VOLT auto work, 30 AMPS
Microprocessor which is made in USA
PWM or ON/OFF series battery charging options
State of charge (SOC) battery regulation
Battery Ah setting, boost charging, equalising charging, float charging
Automatic load reconnection, manual load switch
Temperature compensation
LCD display: SOC as a fuel gauge, all system parameters in digital value, system status as symbols
Full circuit protection, electronic fuse Field adjustable parameters by four buttons
Load control option: ON/OFF, Dusk-to-Dawn, On + setting hours, setting time ON/OFF. (For type II)
Regulation point: 14.4 Volt
Low voltage disconnect: 11.10 Volt
Low voltage Reconnect: 12.5 Volt
Self-consumption: 10mA maximum
Terminals: For wire sizes to 10mm2
Temperature: -35 to +55
Weight: 250g
Dimension: 188.9x130x51.70mm
Compliance: CE.
EPIP30 Solar Charge Controller Data Sheet:
Type
EPIP30
Rated charging current
20A (max26A)
Rated load current ( Ie )
20A
Over load, short circuit protection
1.25 times of Ie for 60secs, 1.5 times of Ie by for 5secs overload protection
≥2 time of Ie short circuit protection
Self consumption
Control mode: <10 mA,LED & LCD display (MAX ) <10mA, total ( MAX ) <20mA
System voltage
12/24V AUTO WORK ;
Work temperature
industrial ( I series ): -20 degrees Celsius to +50 degrees Celsius
Battery capacity
Battery in parallel from 50AH to 5000ah
Boost charging
14.8V ; ×2/24V ;
equalizing charging voltage
14.4V;×2/24V ;
Float charging
13.4V;×2/24V ;
Temperature compensation
-5mv/ degrees Celsius /2v;
Over discharge voltage
11.1V ; ×2/24V ;
Control mode
PWM charging mode & ON/OFF mode for options, control point voltage is the
intelligent compensation modify of the battery.
20A 12V | 24V DC EPIP30 Solar Charge Controller
Posted by admin in News
20A 12V | 24V DC EPIP30 Solar Charge Controller with LCD Display
Adds new features and protections using highly advance technology
Provides longer battery life and improved system performance
Sets new standards for reliability and self-diagostics
Model No: EPIP30
EPIP30-20: 12/24 VOLT auto work, 20 AMPS
EPIP30-30: 12/24 VOLT auto work, 30 AMPS
Microprocessor which is made in USA
PWM or ON/OFF series battery charging options
State of charge (SOC) battery regulation
Battery Ah setting, boost charging, equalising charging, float charging
Automatic load reconnection, manual load switch
Temperature compensation
LCD display: SOC as a fuel gauge, all system parameters in digital value, system status as symbols
Full circuit protection, electronic fuse Field adjustable parameters by four buttons
Load control option: ON/OFF, Dusk-to-Dawn, On + setting hours, setting time ON/OFF. (For type II)
Regulation point: 14.4 Volt
Low voltage disconnect: 11.10 Volt
Low voltage Reconnect: 12.5 Volt
Self-consumption: 10mA maximum
Terminals: For wire sizes to 10mm2
Temperature: -35 to +55
Weight: 250g
Dimension: 188.9x130x51.70mm
Compliance: CE.
EPIP30 Solar Charge Controller Data Sheet:
≥2 time of Ie short circuit protection
intelligent compensation modify of the battery.