Ningbo Cinco Electronics co.,Ltd
  • Home
  • About us
  • Solar Panel
  • Solar Regulator
  • Solar Inverter
  • MC4 Connector
  • Battery Equalizer
Home » News » APS YC500 Micro Inverter for Grid Tied Solar System Kit
7月13

APS YC500 Micro Inverter for Grid Tied Solar System Kit

Posted by admin in News

YC500 Micro Inverter for Grid Tied Solar System Kit

What is PV Micro Inverter?
All solar power systems work in a pretty similar way. The solar panels themselves are mounted on the roof of a home, or in an area that is exposed to the sun for most of its daily travel. When the sun strikes the panels, they produce a DC current proportional to the amount of sunlight that they receive.

The DC current from all of the panels in the solar power system is routed to a large inverter that is usually located near the homes electrical panel.  This inverter does a few things, but its primary job is to convert the DC current being produced by the solar panels into AC current that can be used by your home.  When the panels are producing current, the inverter will send this to your home and disconnect you from the local power utility.  If you generate more power than you are using during the day, the excess power is sent back to the local utility and you will receive a credit for this power.  In the evening when the sun has set, the inverter switches you back to the local utility so you can once again buy the power you need for your home.  The idea is to generate enough excess power during the day to offset any power you need to buy during the evenings and on cloudy days so your electricity bill will be zero.

The challenge with this current scenario is that because of the long run of wires between the solar panels and the inverter, there is a lot of power lost in the journey. Also a low voltage DC current suffers more loss than a higher voltage AC current does and this compounds the problem.  Up until now this loss was just tolerated as part of the system and adjustments had to be made to generate more power to compensate for the loss.

The new PV micro inverter is looking to change all that and is fast becoming a favorite among solar enthusiasts.  Instead of having one large inverter that handles all of the conversion from DC current to AC current for the home, these new solar panels have a PV micro inverter installed in each of them that does this conversion in the panel.  This PV micro inverter takes the DC current generated by the solar panel, and converts it directly to AC current before leaving the panel.  This way you have a complete solution within the solar panel that can produce the exact power your home needs to operate.  Because higher voltage AC electricity has a lot less loss over the long wire run into your house, you get a more efficient conversion and can use a larger portion of the power you are generating with your solar panels.  This also makes expanding your solar power system each year easier as well since you can simply buy more panels and add them to your homes wiring.  There is never a need to worry about having to upgrade your inverter.  Even though these new solar panels are a little more expensive than the older ones, eliminating the cost of the larger inverter makes the total system cost about the same.

A solar power system for your home is a great way for you to generate a good amount of free electricity and can help you lower or eliminate your electricity bill each month.  Over the years, improvements in these systems have made them less expensive, more efficient and easier to install than older systems and the innovations still continue.  One of the latest technological improvements being offered in several solar panel systems is a device called a PV micro inverter and this may prove to be a major upgrade to the standard solar panel.

 

What is the advance of YC500 Micro Solar Inverter?
Not all inverters are created equal. Previously, the power produced by an entire solar power system fed into a single bulky inverter. Because the panels were connected in a daisy chain pattern, unexpected shading or problems with even one panel would compromise the system. (Think Christmas lights.) Moreover, the long wire runs between the panel and inverter meant the loss of some power.

Solar Micro Inverter are the hard-working, un-flashy, and utterly necessary components of every solar power system. They turn the DC current generated by your solar panels into AC current that you can use for your appliances and other electricity needs.

Fortunately, newer technology has brought us Solar Micro Inverter, one of which is attached to every solar panel.  Even if one panel malfunctions, becomes shaded, or has other issues, the ability of neighboring panels to produce power is not compromised.

Sound good? Greater efficiency and reliability are just a few of the benefits of micro-inverters. Because each panel is independently feeding power into your system, your solar panel system can be spread out over different areas of your roof or property and be made of different types of panels. (Traditional inverters require the solar panels of a system to share an orientation and product type.)  Theyre also less bulky and easier to add on to later.

Youll be glad to know that Premier Power uses micro-inverters for its solar power systems. It goes hand in hand with our commitment to building you the best and most reliable solar power solutions for your home, business, or farm. Come visit us today for a free solar evaluation!

YC500 Micro Solar Inverter Specification:

Type YC500A(for 2x250w Solar panels)
Input Data (DC)
Recommended PV module power (STC) range(W) 180~280
MPPT voltage range (V) 22~45
Maximum input voltage(V) 55
Maximum input current(A) 12
Output Data (AC)
Rated output power 500
Max. Output current (A) 2.4
Nominal output voltage/range  (V) Match grid requirement
Nominal output frequency/range  (Hz) Match grid requirement
Power factor >0.95
Total Harmonic Distortion <3%
Maximum units per 20A branch 11
Efficiency
Peak inverter efficiency 95.50%
Euro weighted efficiency 95.00%
Nominal MPP tracking efficiency 99.00%
Mechanical Data
Operating temperature range (Ambient)(℃) -40 ~ +65
Storage temperature range (℃) -40 ~ +85
Dimensions (W x H x D,mm) 221 X 167 X 29
Weight (kg) 2.5
Enclosure Rating IP65
Cooling Natural Convection
Features & Compliance
Communication Powerline
Design lifetime(yrs) 25

 

 

ECU-3 Monitor for YC500 Micro Solar Inverter

Communication Interface
 Powerline  APS Proprietary
 Ethernet  10/ Auto-sensing, Auto-negotiation
 RS485 standard
 GPRS with USB interface Optional
 Power Requirements
 AC Outlet  110~240Vac,50~60Hz
 Power Consumption (W)  2.5W
 Mechanical Data
 Dimension(W×H×D) (mm)  180*110*40
 Weight (g) 300
 Ambient Temperature Range (℃)  -40 to +65
 Cooling  Nature Convection – no fans
 Enclosure Environmental Rating  Indoor – NEMA 1(IP30)
 Features
 Standard Warranty Term (year) 3

近期文章

  • Landstar EP LS1024B LS2024B LS3024B Solar charge controller
  • MT-5 Remote Meter for Tracer MPPT Solar Controller
  • MT-2 Meter LCD display for EPIPC-COM 10A 20A Solar Controller

Tags

Flexible Solar Panel LandStar Solar Controller MPPT controller MPPT Solar Controller Photovoltaic Cables Solar Air Conditioner Solar Cable Solar Cell Solar Charge Controller Solar Controller Solar Energy Solar Freezer Solar Light Controller Solar Panel Solar Refrigerator Solar Water Heater ViewStar Solar Controllers Wincong Solar Controller wind generator Wind Turbine

Contact Us

  • Address: 13-4 Room,1# Shunye Street, Luotuo Jiedao Zhenhai, Ningbo City,China
  • Post Code: 315200
  • Tel: 86 574 26266608
  • Fax: 86 574 26266618
  • Email: info@Pvsolarchina.Com
  • © 2010 Ningbo Cinco Electronics co.,Ltd   Battery Equalizer |  Battery Balancer