SCL 10A 12V 24V auto PWM intelligence Solar Charge Controller
Main Features:
1. Intelligent control is realized by using microprocessor and dedicated control calculation.
2. Four load working modes:Pure lighting control,lighting control &timing control, hand operation and debug mode.
3. Scientific management of battery:as it is overcharged,the battery will get booster tension charge.As a result compulsory maintenancevis available for the battery.In normal working state,the direct charge and floating charge are both available,so that the battery life-span is increased.Bsides,the adoption of high precision temperature compensation makes the charing more accurate.
4. Comparing with the charing loops using diodes, the one that adopts double MOS series circuit control makes the voltage loss dropped by 50%.With the PWMfuzzy control in charge efficiency is improved a lot
5. LED screen shows the working state of solar battery ,storage battery and load.LED shows the adjusted parameter.In this way, users can learn the operation state in ream time.Besides,there are various choices for parameter, users can select the proper working mode based on the different conditions.
6. Various protections include over-charge,over-discharge and over-load,as well as unique electron short circuit protrvtion and connection-reverse protection.All the protections are harmless to any parts and fuse,fuse only as the end protection of a controller itself to protect the amount of internal short circuit damage.Non wire jumpers design improves the reliability and durability of the products.
7. Industrial-grade chips and precision components are sdopted for all the controls.Therefore,the controller performs well in very low and high temperature,as well as humid environment.At the same time,with the use of crystal timing control,the timing function of controller is much more reliable.
8. Using large-diameter wire terminal,can fix the wire which max size is 6mm2
9. Parameter is set to power-down save function,the system model and control parameters,and other important data are stored inside the chip,after power is not lost,to make the sdjustment more convenient,more reliable system.
10. Using 2digital LEDs display and settings,one-button operation to complrtr all of the settings, intuitive and easy to use.
Specification:
Model no
SCL-10A
Rated charge current
10A
Rated load current
10A
Work voltage
12/24V Auto
Over load, short circuit protection
1.25 rated load current 60sec, 1.5 rated loads current 5sec, over load protection action. ≥3 Rated load current short circuit protection action.
No load current
≤6mA
Charging circuit voltage drop
≤0.26 V
Load circuit voltage drop
≤0.15 V
Over voltage protection
17V; ×2/24V
Work temperature
Industry stage:-35 C to +55C;
Boost charge voltage
14.6V;×2/24V; (keep 10min)
Direct charge voltage
14.4V; ×2/24V; (keep 10min)
Float charge voltage
13.6V; ×2/24V;
charge return voltage
13.2v;×2/24V;
Temperature compensation
-5mv/?/cell (Boost charge, Direct charge, Float charge, charge return voltage);
Lower voltage indicate
12.0V; ×2/24V;
Over discharge voltage
11.1V(no load)- real-time modified voltage by the discharge rate; ×2/24V;
Over discharge return voltage
12.6V; ×2/24V
Control mode
PWM charge mode; modified discharge voltage by the discharge rate
SCL 10A 12V 24V auto PWM intelligence Solar Charge Controller
Posted by admin in News
SCL 10A 12V 24V auto PWM intelligence Solar Charge Controller
Main Features:
1. Intelligent control is realized by using microprocessor and dedicated control calculation.
2. Four load working modes:Pure lighting control,lighting control &timing control, hand operation and debug mode.
3. Scientific management of battery:as it is overcharged,the battery will get booster tension charge.As a result compulsory maintenancevis available for the battery.In normal working state,the direct charge and floating charge are both available,so that the battery life-span is increased.Bsides,the adoption of high precision temperature compensation makes the charing more accurate.
4. Comparing with the charing loops using diodes, the one that adopts double MOS series circuit control makes the voltage loss dropped by 50%.With the PWMfuzzy control in charge efficiency is improved a lot
5. LED screen shows the working state of solar battery ,storage battery and load.LED shows the adjusted parameter.In this way, users can learn the operation state in ream time.Besides,there are various choices for parameter, users can select the proper working mode based on the different conditions.
6. Various protections include over-charge,over-discharge and over-load,as well as unique electron short circuit protrvtion and connection-reverse protection.All the protections are harmless to any parts and fuse,fuse only as the end protection of a controller itself to protect the amount of internal short circuit damage.Non wire jumpers design improves the reliability and durability of the products.
7. Industrial-grade chips and precision components are sdopted for all the controls.Therefore,the controller performs well in very low and high temperature,as well as humid environment.At the same time,with the use of crystal timing control,the timing function of controller is much more reliable.
8. Using large-diameter wire terminal,can fix the wire which max size is 6mm2
9. Parameter is set to power-down save function,the system model and control parameters,and other important data are stored inside the chip,after power is not lost,to make the sdjustment more convenient,more reliable system.
10. Using 2digital LEDs display and settings,one-button operation to complrtr all of the settings, intuitive and easy to use.
Specification: